-40%
General Finishes Water-Based Flat Out Flat Acrylic Top Coat, Gallon (GF.GFO)
$ 46.98
- Description
- Size Guide
Description
CSHardware Is A Certified General Finishes DistributorFlat out Flat is a truly "Flat" water-based topcoat with a velvety look and feel. Made with a durable, self cross-linking acrylic, its performance characteristics are similar to High Performance.
Features:
Type
: Water-Based
Sheen
: Flat
Interior/Exterior
: Interior Only
Coats
: 3 Coats
Coverage
: 600 Sq. Ft./Gal.
Viscosity
: 50-60 sec.
Application Method
: Brush, Roll or Spray
Spray Tip Sizes
: HLVP .043 - .051 Medium Air Cap
Water Spills and Daily Use
:
Clean water spills up as they occur during regular use and protect from heat. Although General Finishes products are water resistant, they are not impervious to water. Surfaces will not be damaged by spilled water so long as it is cleaned up promptly. We recommend using coasters to protect your wood from standing water and pot holders to protect from heat.
Applicator Cleanup
:
Warm, soapy water. For best results, clean all equipment with General Finishes Brush and Gun Cleaner.
Proprietary WARNING!
: If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log onto www.epa.gov/lead.